ExpressRaterShipping Cost Configuration enables you to calculate shipping costs for ExpressRater, Correios, DHL, FedEx, or UPS Connect shipping cost calculator.
You can calculate shipping in MarketDirect StoreFront without using the third-party calculators. For more information on setting up and pricing delivery methods, see Delivery Methods.
ExpressRaterExpressRater is a shipping rate calculator designed to enable buyers to choose a supported delivery method and obtain a price for shipping. ExpressRater’s shipping rate calculator provides the administrator with an accurate means of calculating shipping rates close to the actual cost of the shipment based on different carrier charges and delivery methods, taking destination, lot size, weight, and number of cartons into consideration. The tool minimizes the risk of overcharging for shipping (a reason for lost sales) or losing money by charging your buyers less than actual shipping charges.
For more information about ExpressRater, please reach out to your salesperson or systems integrator.
ExpressRater can calculate shipping charges to destinations throughout the world originating from the United States or Canada.
To enable ExpressRater for shipping cost calculations
1 Go to Administration > Platform Settings > Site Settings.
● Open the Shipping Cost Configuration tab.
● Click the Enable Rate Lookup For Shipping Cost Calculation box in the Shipping Cost Configuration sections.
● Click Save.
2 Go Administration > Platform Settings > Delivery Methods.
● To configure ExpressRater for any of the delivery methods listed, click the Edit icon in the Delivery Methods table.
● Click the Use RateLookup box.
● Complete the fields in the Configuration of Rate Lookup section.
● Choose the Shipping Carrier to use for the delivery method.
● Choose the Carrier Service for the delivery method.
● Enter the Package Max Weight (In LBS).
● Select Shipping Mark Up (increase or decrease) and enter the amount (percentage or dollar figure amount) or leave the mark up value at zero if you don’t want to change the value returned by ExpressRater.
● Click Save.
To configure another delivery method, click Back in your web browser and repeat the previous steps.
● Click Expand in the View shipment provider configuration steps field.
● Click Configure entry points for all delivery methods assigned to printshops to open the Print Shops page.
3 From the Print Shops page:
● Open the target Print Shop by clicking on the Name.
● Click Assign/Edit Delivery Methods in the Supported Delivery Methods section.
● Choose the appropriate delivery methods from the list.
● Choose the appropriate entry point of the delivery method for the Print Shop.
This will make the delivery methods available
to customers when ordering products from this Print Shop.
The delivery methods available to the user are based on the
following rules:
If the Department where
the user is associated has no delivery methods assigned, then the
Company level delivery methods are applied.
If
there are no Company level delivery methods assigned, then
the Print Shop
level delivery methods are applied.
If the delivery method is not available at the Print
Shop, it cannot be available at the
Company.
If the delivery method does not exist at the Company, then
it cannot be made available at the
Department.
● Add numerical values to Display Priority to change from an alphabetical listing.
● Click Save.
● Go back to the Edit Delivery Methods page.
● Click Expand in the View shipment provider configuration steps field.
● Click Configure entry points for all delivery methods assigned to company to open the Companies page.
You can also open the Companies page by selecting Administration > Companies > Companies.
4 From the Companies page:
● Open the target Company by clicking on the Name.
● Click Assign/Edit Delivery Methods in the Supported Delivery Methods section.
● Choose the appropriate delivery methods from the list.
● Choose the appropriate entry point of the delivery method for the Print Shop.
The selected delivery methods will be available to customers associated with the Company.
● Click Save.
● Go back to the Edit Delivery Methods page.
● Click Expand in the View shipment provider configuration steps field.
● Click Configure entry points for all delivery methods assigned to departments to open the Departments page.
You can also open the Departments page by selecting Administration > Companies > Departments.
5 From the Departments page:
● Open the target Department by clicking on the Name.
● Click Assign/Edit Delivery Methods in the Supported Delivery Methods section.
● Choose the appropriate delivery methods from the list.
● Choose the appropriate entry point of the delivery method for the Print Shop.
The selected delivery methods will be available to customers associated with the Department.
● Click Save.
● Go back to the Edit Delivery Methods page.
● Click Expand in the View shipment provider configuration steps field.
● Click Configure Products weight and dimensions to open the Products page.
You can also open the Departments page by selecting Administration > Site Configuration > Products.
6 From the Products page:
For orders with multiple items packaged together, the ExpressRater engine will calculate shipping based on the ship from/ship to addresses, services applied, and package weight.
● Open the target Product by clicking the Name.
● Select the Settings tab.
● Complete the Shipping Subcontainer fields in order to generate shipping rate calculations.
If you use a subcontainer (a box that
encloses the ordered material but is not necessarily the sturdy outer
box used for shipping), specify the dimensions for a single box that
will serve as the “subcontainer” and specify the maximum number of
copies/quantity of this product that can fit inside it. For instance,
you ship business cards in a 7 x 31/2 x 2 card box that you place
in a larger box for shipping (the latter will vary based on the number
of subcontainers are to be shipped in it).
If you do not use a subcontainer, enter the dimensions of the product
itself and then set the quantity to 1.
● Click the Ship Item Separately option to force the product into a separate shipping carton. If you do not use this, then carton count will be based on weight of all items in the order and the maximum weight per carton set on the delivery method chosen.
● Enter the dimensions of the sub-carton in which the product will be packed for shipping:
● Width of the subcontainer.
● Length of the subcontainer.
● Height of the subcontainer.
● Max Quantity per Subcontainer is the maximum number of items to include in each sub-container.
● Enter an amount in the Max Quantity per Subcontainer field to indicate the maximum number of items to include in each sub-container.
If you are not using a subcontainer, the information should reflect the dimensions of a single piece and quantity should be 1.
● Click Save & Exit.
The settings for the FF-Inventory product type are in the Shipping tab.
CorreiosMarketDirect StoreFront supports integration with Brazilian carrier Correios for calculating shipping costs.
To enable Correios for shipping cost calculations
1 Go to Administration > Site Settings.
2 Open the Shipping Cost Configuration tab.
3 From the Add New pull-down list, select Correios and then click Add New.
4 In the Correios parameters section, enter values in the following fields:
● Shipment Account Name: You can use any name you choose for the account name.
● Administrative Code (optional): You can enter your administrative code for Correios, but it is not required.
● Password (optional): If you enter your administrative code, enter your password in this field.
5 Click Expand in the “View shipment provider configuration steps” field.
6 Click Configure shipment provider settings for delivery methods to open the “Delivery Methods” page.
● To configure Correios for any of the delivery methods, scroll down to the delivery method. The four delivery methods SEDEX 10 Retail (SEDEX 10 Varejo in Portuguese), SEDEX Retail (SEDEX Hoje Varejo in Portuguese), and SEDEX Today Retail (SEDEX Varejo in Portuguese) are Correios delivery methods.
● Click the edit icon.
● On the Edit Delivery Method page, configure the method as needed.
● Select the shipping Carrier to use for the delivery method.
● Configure pricing for the delivery method as needed.
For more information on configuring pricing of shipping/delivery methods, see Pricing.
● Click Save.
To configure another delivery method, click Back and repeat the procedure in this step.
7 Click Expand in the View Shipment Provider Configuration Steps field.
8 Click Configure entry points for all delivery methods assigned to Print Shops to open the Print Shops page.
● Open a Print Shop that is not yet configured for Correios.
● Assign any of the available delivery methods to this particular Print Shop.
● Click Assign/Edit Delivery Methods.
● Select the delivery methods from the list.
This will make the delivery methods
available to customers when ordering products from this Print Shop. The delivery methods
available to the user are based on the following rules: if the department
to which the user is associated has no delivery methods assigned then
the company-level delivery methods are applied. If there are no company-level
delivery methods assigned then the Print Shop-level
delivery methods are applied. So the rule is: department > company
> Print Shop: the
lowest level that has shipping will be applied. See the box below
for information on the MarketDirect StoreFront
model for shipping and payment methods.
● Click Save.
9 Click Expand in the View Shipment Provider Configuration Steps field.
10 Click Configure entry points for all delivery methods assigned to the company to open the Manage Company page.
● Check
the Correios Config. Status
column to see which Print Shops
still need to be configured for Correios (i.e., those marked with
rather than 
).
● Open the Company that is not configured for Correios.
● Click Assign/Edit Delivery Methods.
● Select the delivery methods from the list that will be available to users associated with this company.
The selected delivery methods will be available to customers associated with the company when placing orders.
● Click Save.
11 Click Expand in the View Shipment Provider Configuration Steps field.
12 Click Configure entry points for all delivery methods assigned to departments to open the Departments page.
● Open the department that is not configured for Correios.
● Click Assign/Edit Delivery Methods.
● Select the delivery methods from the list that will be available to users associated with this department.
The selected delivery methods will be available to customers associated with the company when placing orders.
● Click Save.
13 Click Expand in the View Shipment Provider Configuration Steps field.
14 Click Configure shipment box dimensions for all products to open the Manage Products page.
● Open the product to configure for Correios.
● In the Sub Container Dimension fields, you will provide values for each product to get Correios shipping calculations:
You can always get the current
maximum values from the Correios web site.
If you specify values outside the minimum - maximum range set by Correios,
you will see a red exclamation point icon on in
the Correios Configuration Status column on the Manage Products page.
Otherwise, a green check mark
will be shown.
● Weight: For non-printed products, the weight of the individual item is also required to get the shipping charge.
● Width: Type a value for the width and select the appropriate unit of measurement.
● Length: Type a value for the length and select the appropriate unit of measurement.
● Height: Type a value for the height and select the appropriate unit of measurement.
● Max Qty per Subcontainer: Enter the maximum quantity of the product to ship in each subcontainer.
● Click Save & Exit.
15 Go to Administration > Site Settings.
● Open the Shipping Cost Configuration tab.
● Check the box Use Correios For Shipping Cost Calculation.
● From the pull-down menu, select the Correios account to use for Correios shipping cost calculation.
● Click Save.
DHLMarketDirect StoreFront supports integration with DHL's shipping cost calculator, which enables customers to compare shipping rates and choose the method that best suits their needs. DHL's shipping cost calculator provides site administrators with an accurate means of calculating shipping prices close to the actual cost of the shipment based on different shipping options. This will minimize the risk of overcharging for shipping (a reason for lost sales) or losing money by charging your customers less than actual shipping charges.
Integration with DHL is available as a licensable
option. For more information
about DHL and to establish your DHL account, you can call DHL at 1-800-805-9306,
visit www.dhl.com, or send e-mail
to gmus-contact@dhl.com.
To verify that you are licensed for DHL integration, go to Administration
> License, scroll down to the SCALE OPTIONS section, and
ensure that the Shipping Providers
box is checked.
You can set up DHL at the site level or at the company level (i.e.,
each company can have its own DHL account).
To enable DHL for shipping cost calculations
1 Go to Administration > Site Settings.
2 Open the Shipping Cost Configuration tab.
3 From the Add New pull-down list, select DHL and then click Add New.
4 In the DHL Parameters section, enter the values you receive from DHL in the following fields:
● Shipment Account Name
● DHL Site ID
● DHL Password
● DHL Shipper account number
5 Click Expand in the “View shipment provider configuration steps” field.
6 Click Configure shipment provider settings for delivery methods to open the “Delivery Methods” page.
● To configure DHL for any of the delivery methods, click the edit icon.
● Check the Use DHL box.
● Select the shipping Carrier to use for the delivery method.
● Configure pricing for the delivery method as needed.
For more information on configuring pricing of shipping/delivery methods, see Pricing.
● Click Save.
To configure another delivery method, click Back and repeat the procedure in this step.
7 Click Expand in the View Shipment Provider Configuration Steps field.
8 Click Configure entry points for all delivery methods assigned to Print Shops to open the Print Shops page.
● Check
the DHL Config. Status column
to see which Print Shops
still need to be configured for DHL (i.e., those marked with rather than ).
● Open the Print Shop that is not yet configured for DHL.
● Assign any of the available delivery methods to this particular Print Shop.
● Click Assign/Edit Delivery Methods.
● Select the delivery methods from the list.
This
will make the delivery methods available to customers when ordering
products from this Print Shop.
The delivery methods available to the user are based on the following
rules: if the department to which the user is associated has no delivery
methods assigned then the company-level delivery methods are applied.
If there are no company-level delivery methods assigned then the Print Shop-level delivery methods
are applied. So the rule is: department > company > Print Shop: the lowest level that
has shipping will be applied. See the box below for information on
the MarketDirect StoreFront
model for shipping and payment methods.
DHL
Delivery: When using DHL, if you select any DHL delivery method, you
will be prompted to enter the following information:
Enter your DHL Account ID and
Postal Code.
● Click Save.
9 Click Expand in the View Shipment Provider Configuration Steps field.
10 Click Configure entry points for all delivery methods assigned to the company to open the Manage Company page.
● Check
the DHL Config. Status column
to see which Print Shops
still need to be configured for DHL (i.e., those marked with rather than ).
● Open the Company that is not configured for DHL.
● Click Assign/Edit Delivery Methods.
● Select the delivery methods from the list that will be available to users associated with this company.
The selected delivery methods will be available to customers associated with the company when placing orders.
● Click Save.
11 Click Expand in the View Shipment Provider Configuration Steps field.
12 Click Configure entry points for all delivery methods assigned to departments to open the Departments page.
● Check
the DHL Config. Status column
to see which Departments still need to be configured for DHL (i.e.,
those marked with rather
than ).
● Open the product that is not configured for DHL.
● Click Assign/Edit Delivery Methods.
● Select the delivery methods from the list that will be available to users associated with this department.
The selected delivery methods will be available to customers associated with the company when placing orders.
● Click Save.
13 Click Expand in the View Shipment Provider Configuration Steps field.
14 Click Configure shipment box dimensions for all products to open the Manage Products page.
● Check
the DHL Config. Status column
to see which products still need to be configured for DHL (i.e., those
marked with 
rather than 
).
● Open the product that is not configured for DHL.
● In the Sub Container Dimension fields, you will provide values for each product to get DHL shipping calculations: :
● Width: Type a value for the width and select the appropriate unit of measurement.
● Length: Type a value for the length and select the appropriate unit of measurement.
● Height: Type a value for the height and select the appropriate unit of measurement.
● Qty/Pack: Enter the default quantity/number of packages for the product.
● Weight: For non-printed products, the weight of the individual item is also required to get the shipping charge.
● Click Save & Exit.
15 Go to Administration > Site Settings.
● Open the Shipping Cost Configuration tab.
● Check the box Use DHL For Shipping Cost Calculation.
● From the pull-down menu, select the DHL account to use for DHL shipping cost calculation.
● Click Save.
FedExMarketDirect StoreFront supports integration with FedEx's shipping cost calculator, which enables customers to compare shipping rates and choose the method that best suits their needs. The FedEx shipping cost calculator provides site administrators with an accurate means of calculating shipping prices close to the actual cost of the shipment based on different shipping options. This will minimize the risk of overcharging for shipping (a reason for lost sales) or losing money by charging your customers less than actual shipping charges.
Integration with FedEx is available as a licensable
option. For more information
about FedEx and to establish your FedEx account, you can call FedEx
at 1-800-463-3339 or
visit www.fedex.com.
To verify that you are licensed for UPS Connect integration, go to
Administration > License,
scroll down to the SCALE OPTIONS section, and ensure that the Shipping Providers box is checked.
You can set up FedEx
at the site level or at the company level (i.e., each company can
have its own FedEx
account).
To enable FedEx for shipping cost calculations
1 Go to Administration > Site Settings.
2 Open the Shipping Cost Configuration tab.
3 From the Add New pull-down list, select FedEx and then click Add New.
4 In the DHL Parameters section, enter the values you receive from FedEx in the following fields:
● FedEx Rate Service Test URL
● FedEx Rate Service Live URL
● Shipment Account Name
● FedEx Account Number
● FedEx Meter Number
● UserCredential Key
● UserCredential Password
5 Click Expand in the “View shipment provider configuration steps” field.
6 Click Configure shipment provider settings for delivery methods to open the “Delivery Methods” page.
● To configure FedEx for any of the delivery methods, click the edit icon.
● Check the Use FedEx box.
● Select the shipping Carrier to use for the delivery method.
● Configure pricing for the delivery method as needed.
For more information on configuring pricing of shipping/delivery methods, see Pricing.
● Click Save.
To configure another delivery method, click Back and repeat the procedure in this step.
7 Click Expand in the View Shipment Provider Configuration Steps field.
8 Click Configure entry points for all delivery methods assigned to Print Shops to open the Print Shops page.
● Check
the FedEx Config. Status column
to see which Print Shops
still need to be configured for FedEx (i.e., those marked with rather than ).
● Open the Print Shop that is not yet configured for FedEx.
● Assign any of the available delivery methods to this particular Print Shop.
● Click Assign/Edit Delivery Methods.
● Select the delivery methods from the list.
This will make the delivery methods
available to customers when ordering products from this Print Shop. The delivery methods
available to the user are based on the following rules: if the department
to which the user is associated has no delivery methods assigned then
the company-level delivery methods are applied. If there are no company-level
delivery methods assigned then the Print Shop-level
delivery methods are applied. So the rule is: department > company
> Print Shop: the
lowest level that has shipping will be applied. See the box below
for information on the MarketDirect StoreFront
model for shipping and payment methods.
DHL Delivery: When using DHL, if you select any DHL delivery method,
you will be prompted to enter the following information:
Enter your DHL Account ID and
Postal Code.
● Click Save.
9 Click Expand in the View Shipment Provider Configuration Steps field.
10 Click Configure entry points for all delivery methods assigned to the company to open the Manage Company page.
● Check
the FedEx Config. Status column
to see which Print Shops
still need to be configured for FedEx (i.e., those marked with rather than ).
● Open the Company that is not configured for FedEx.
● Click Assign/Edit Delivery Methods.
● Select the delivery methods from the list that will be available to users associated with this company.
The selected delivery methods will be available to customers associated with the company when placing orders.
● Click Save.
11 Click Expand in the View Shipment Provider Configuration Steps field.
12 Click Configure entry points for all delivery methods assigned to departments to open the Departments page.
● Check
the FedEx Config. Status column
to see which Departments still need to be configured for FedEx (i.e.,
those marked with rather
than ).
● Open the product that is not configured for FedEx.
● Click Assign/Edit Delivery Methods.
● Select the delivery methods from the list that will be available to users associated with this department.
The selected delivery methods will be available to customers associated with the department when placing orders.
● Click Save.
13 Click Expand in the View Shipment Provider Configuration Steps field.
14 Click Configure shipment box dimensions for all products to open the Manage Products page.
● Check
the FedEx Config. Status column
to see which products still need to be configured for FedEx (i.e.,
those marked with rather than ).
● Open the product that is not configured for FedEx.
● In the Sub Container Dimension fields, you will provide values for each product to get FedEx shipping calculations: :
● Width: Type a value for the width and select the appropriate unit of measurement.
● Length: Type a value for the length and select the appropriate unit of measurement.
● Height: Type a value for the height and select the appropriate unit of measurement.
● Qty/Pack: Enter the default quantity/number of packages for the product.
● Weight: For non-printed products, the weight of the individual item is also required to get the shipping charge.
● Click Save & Exit.
15 Go to Administration > Site Settings.
● Open the Shipping Cost Configuration tab.
● Check the box Use FedEx For Shipping Cost Calculation.
● From the pull-down menu, select the FedEx account to use for FedEx shipping cost calculation.
● Click Save.
UPS
ConnectUPS Connect is UPS' shipping cost calculator that enables customers to compare shipping rates and choose the method that best suits their needs. UPS Connect's shipping cost calculator provides site administrators with an accurate means of calculating shipping prices close to the actual cost of the shipment based on different shipping options. This will minimize the risk of overcharging for shipping (a reason for lost sales) or losing money by charging your customers less than actual shipping charges.
Integration with UPS Connect is available
as a licensable option. For
more information about UPS CONNECT and to establish your UPS CONNECT
account, you can call UPS at 1-800-711-5914, visit www.upsconnect.com,
or send e-mail to connect@ups.com.
To verify that you are licensed for UPS Connect integration, go to
Administration > License,
scroll down to the SCALE OPTIONS section, and ensure that the Shipping Providers box is checked.
You can set up UPS Connect at the site level or at the company level
(i.e., each company can have its own UPS Connect account).
Note on the UPS Delivery Method: Consult the table below for details on UPS delivery method support for order shipments originating in the United States and Canada. If a buyer chooses a non-supported delivery method, the order will require a manual quote (i.e., the requires quote workflow).
Delivery Methods |
Within Canada |
Canada to US |
US to Canada |
UPS Next Day Air® Early A.M. SM |
û |
ü |
û |
UPS Saver |
û |
ü |
ü |
UPS Saver SM |
ü |
û |
û |
UPS Second Day Air® |
ü |
û |
û |
UPS Standard |
ü |
ü |
ü |
UPS Three-Day Select® |
û |
ü |
û |
UPS Express Plus |
û |
ü |
û |
UPS Worldwide ExpeditedSM |
û |
ü |
ü |
UPS Worldwide ExpressSM |
û |
ü |
û |
UPS ExpeditedSM |
û |
ü |
ü |
UPS Express |
ü |
ü |
û |
UPS Express Early A.M. SM |
û |
ü |
û |
UPS Express Plus |
û |
ü |
û |
UPS Ground |
û |
ü |
û |
UPS Next Day Air Saver |
ü |
û |
û |
UPS Next Day Air® |
ü |
ü |
û |
To enable UPS Connect for shipping cost calculations
1 Go to Administration > Site Settings.
2 Open the Shipping Cost Configuration tab.
3 From the Add New pull-down list, select UPS and then click Add New.
4 In the UPS Parameters section, enter the values you receive from UPS in the following fields:
● UPS Auth Key
● UPS Username
● UPS Password
5 Click Expand in the “View shipment provider configuration steps” field.
6 Click Configure shipment provider settings for delivery methods to open the “Delivery Methods” page.
● To configure UPS Connect for any of the delivery methods, click the edit icon.
● Check the Use UPS Connect box.
● Select the shipping Carrier to use for the delivery method.
● Configure pricing for the delivery method as needed.
For more information on configuring pricing of shipping/delivery methods, see Pricing.
● Click Save.
To configure another delivery method, click Back and repeat the procedure in this step.
7 Click Expand in the View Shipment Provider Configuration Steps field.
8 Click Configure entry points for all delivery methods assigned to Print Shops to open the Print Shops page.
● Check
the UPS Connect Config. Status
column to see which Print Shops
still need to be configured for UPS Connect (i.e., those marked with
rather than ).
● Open the Print Shop that is not yet configured for UPS Connect.
● Assign any of the available delivery methods to this particular Print Shop.
● Click Assign/Edit Delivery Methods.
● Select the delivery methods from the list.
This will make the delivery methods
available to customers when ordering products from this Print Shop. The delivery methods
available to the user are based on the following rules: if the department
to which the user is associated has no delivery methods assigned then
the company-level delivery methods are applied. If there are no company-level
delivery methods assigned then the Print Shop-level
delivery methods are applied. So the rule is: department > company
> Print Shop: the
lowest level that has shipping will be applied. See the box below
for information on the MarketDirect StoreFront
model for shipping and payment methods.
DHL Delivery: When using UPS Connect, if you select any DHL delivery
method, you will be prompted to enter the following information:
Enter your DHL Account ID and Postal
Code.
● Click Save.
9 Click Expand in the View Shipment Provider Configuration Steps field.
10 Click Configure entry points for all delivery methods assigned to the company to open the Manage Company page.
● Check
the UPS Connect Config. Status
column to see which Print Shops
still need to be configured for UPS Connect (i.e., those marked with
rather than ).
● Open the Company that is not configured for UPS Connect.
● Click Assign/Edit Delivery Methods.
● Select the delivery methods from the list that will be available to users associated with this company.
The selected delivery methods will be available to customers associated with the company when placing orders.
● Click Save.
11 Click Expand in the View Shipment Provider Configuration Steps field.
12 Click Configure entry points for all delivery methods assigned to departments to open the Departments page.
● Check
the UPS Connect Config. Status
column to see which Departments still need to be configured for UPS
Connect (i.e., those marked with
rather than ).
● Open the product that is not configured for UPS Connect.
● Click Assign/Edit Delivery Methods.
● Select the delivery methods from the list that will be available to users associated with this department.
The selected delivery methods will be available to customers associated with the department when placing orders.
● Click Save.
13 Click Expand in the View Shipment Provider Configuration Steps field.
14 Click Configure shipment box dimensions for all products to open the Manage Products page.
● Check
the UPS Connect Config. Status
column to see which products still need to be configured for UPS Connect
(i.e., those marked with rather than ).
● Open the product that is not configured for UPS Connect.
● In the Sub Container Dimension fields, you will provide values for each product to get UPS Connect shipping calculations: :
● Width: Type a value for the width and select the appropriate unit of measurement.
● Length: Type a value for the length and select the appropriate unit of measurement.
● Height: Type a value for the height and select the appropriate unit of measurement.
● Qty/Pack: Enter the default quantity/number of packages for the product.
● Weight: For non-printed products, the weight of the individual item is also required to get the shipping charge.
● Click Save & Exit.
15 Go to Administration > Site Settings.
● Open the Shipping Cost Configuration tab.
● Check the box Use UPS Connect For Shipping Cost Calculation.
● From the pull-down menu, select the UPS Connect account to use for UPS Connect shipping cost calculation.
● Click Save.